Which Curing Method Is Right for You? Flash Dryer, Conveyor, or Heat Press
When it comes to curing screen prints, there are a few different ways to get the job done, but they’re definitely not all equal. Whether you’re working with plastisol or water-based ink, using the right equipment can make the difference between a cracked, under-cured print and one that holds up wash after wash.
Yes, you can cure prints with a flash dryer or a heat press. But if you’re looking for speed, consistency, and peace of mind? A conveyor dryer is the way to go. Now that we carry a complete range of curing equipment, let’s break down the differences and help you figure out what makes the most sense for your shop.
Flash Dryer: The Starter Setup
Flash dryers are where a lot of printers start—and for good reason. They’re affordable, compact, and can be used to both flash underbase and cure final prints.
Pros:
- Budget-friendly
- Doesn’t take up much space
- Great for beginners and small runs
Cons:
- Manual process—hovering it over each shirt
- Prone to hot spots and uneven curing
- Easy to scorch a shirt if left too long
- You can only cure one shirt at a time
It works, but it keeps you glued to your press and constantly watching the clock.
Heat Press: A Versatile Backup
Heat presses are usually thought of for heat transfers, but they can also be used to cure screen prints—especially water-based inks, which often need pressure in addition to heat to fully cure.
Pros:
- Controlled heat, pressure, and time
- Can fully cure a variety of screen printing inks
- Useful for small batches or test curing
Cons:
- One shirt at a time
- Can flatten or change the texture of plastisol prints
- Not great for thick ink deposits or high-volume printing
A heat press shouldn't be your solution when it comes to curing garments but it will get the job done.
Conveyor Dryer: The Production Powerhouse
If you're printing daily, trying to speed up production, or chasing more consistent results, a conveyor dryer is hands-down your best bet.
Pros:
- Fully controlled heat and belt speed = consistent curing
- Shirts keep moving—less risk of burning
- You can cure dozens of shirts at once
- Saves serious time during production
- Gives your shop a more professional, scalable workflow
Cons:
- Higher upfront cost
- Takes up more space
It’s an investment—but one that pays off fast when you’re curing confidently and cranking through jobs without babysitting your prints.
So Which One’s Right for You?
If you’re just getting started or running occasional jobs, a flash dryer or heat press will get the job done. But if you are printing frequently and have enough to cover the upfront cost a conveyor dryer could be the way to go, provided you have the space for it.
Need Help Choosing?
We stock every type of equipment required for curing. From flash dryers, heat presses, and conveyor dryers all ready to ship. If you’re not sure which one fits your workflow (or your budget), reach out! We’re happy to help you dial in the right setup for your shop.
Comments
Post a Comment